cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2770
Views
0
Helpful
1
Replies

Cisco iWAN design with ISR-G2

smunzani
Level 1
Level 1

Team,

Recently I participated to one of the Cisco partner briefing where they pitched iWAN design using internet as an alternate transport. With dual ISP connections, the increased SLA at reduced cost compare to MPLS. It leveraged DMVPN, WAAS, QoS, PfR features to achieve the goal. If I had a single router per site, its dead simple configuration but don't know how to implement with dual headend router. Would something like attached diagram be possible? How would WAAS function for such redundancy? I am not worried about other features but more worried about how WaaS and PfR would be configured.

iWAN.jpg

Thanks in advance,      

1 Reply 1

mmanzurl
Level 1
Level 1

Hello,

 

 

As you mentioned IWAN can run as single branch  router with multiple transports ( it could be INET + INET2 or INET + MPLS ), or with multiples  branches.

 

 

From hub perspective you can add till 5 transports per hub location ( pages 3,4 and 5)

 

https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Apr2017/CVD-IWANConfigurationFiles-APR17.pdf

 

 

Best Regards

Review Cisco Networking for a $25 gift card