cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

243
Views
5
Helpful
5
Replies

Cisco stack wise technology

Hi All,

Please let me know is it possible configure Cisco Stack wise technology by connecting switches using Gigabit ethernet ports, i.e without stack wise cables.

Thank you,

5 REPLIES 5
Cisco Employee

Re: Cisco stack wise technology

Hello,

 

If the platform supports stackwise virtual, you can do this:

 

https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-3850-series-switches/q-and-a-c67-738577.pdf

 

You would need to check if your device supports this technology. 

 

Hope that helps!

-Bradley Selzer
CCIE# 60833
VIP Expert

Re: Cisco stack wise technology

From Brad's reference:

Q Can I build SVL connections using a 1G interface?
A No.

Re: Cisco stack wise technology

Hi Joseph,

 

In order to use StackWise Virtual technology, switches don't have to be in the same physical location, right? All we have to do is to connect switches using 10G or 40G links, right? In addition Stackwise  virtual only available in Cisco C9500-24Q switches, right?

 

Thank you in advance,

Gayan

VIP Expert

Re: Cisco stack wise technology

I don't know if virtual stack has a latency requirement. If it does, you should be okay if you meet that.

From Brad's it appears some 3850 IOS versions support virtual stacking too.
Highlighted
Cisco Employee

Re: Cisco stack wise technology

Hello,

 

Correct, 3850s support stackwise virtual. Also, I believe 9400 and 9600s now support it as well on newer versions of code. 

 

9400 Release notes

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/16-11/release_notes/ol-16-11-9400.html

 

9600 Release notes

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/release_notes/ol-16-12-9600.html

 

Hope that helps!

-Bradley Selzer
CCIE# 60833
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards