cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
397
Views
0
Helpful
1
Replies

ISDN BCAP error

dshuler
Level 1
Level 1

I'm having a problem with ISDN PRI connecting to a as5300. Using differnent switches or as5300s, I get a "no bcap or bearer capability available" from both the switch and the 5300. Same switch connection tested OK with a t-berd but not the as5300. The debug shows multiframe_established but always the bearer capabilty error soon as a call is attempted.

Thanks for any help you can give me.

1 Reply 1

ciscomoderator
Community Manager
Community Manager

Often times complex troubleshooting issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.