MFR

[drogell]

I have a 3725 with 2 T1csu/dsu, I would like tto bundle rhe 2 ti's tto make

it look like a 3mb pipe, I used the example cisco had and as soon as i put

the encap frame=relay on the 2nd ti the first ti went down, Any help would

be appreciated.

Thanks

Dennis

[ivillegas]

The following configuration will solve your bundling T1 in frame-relay

interface serial 2

no ip address

encapsulation frame-relay

frame-relay lmi-type ansi

!

interface serial 2.1 point-to-point

frame-relay interface-dlci 32 ppp virtual-template1

!

interface Virtual-Template1

ip unnumbered ethernet 0

ppp authentication chap pap

And also check the link

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/pppframe.htm

[svelayud]

Make sure your provider supports MFR on his frame swich.

check this URL for sample configuration.

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087cbf.html#1015440

thanks

Suresh