cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
281
Views
0
Helpful
1
Replies

vlan access-list

pedroquiroga
Level 1
Level 1

Hi,

I´m using vlan access-list to send the traffic to an ids. The problem is that in the port I´m seeing the traffic in one direction (for example I see ICMP responses but no request). This is the configuration :

access-list 41 permit any

vlan access-map PARA-IDS 10

match ip address 41

action forward capture

vlan filter PARA-IDS vlan-list 13-14,16-18,41

interface GigabitEthernet3/7 (****IDS on this port)

switchport capture

switchport capture allowed vlan 13,14,16-18,41

Thanks for the help.

1 Reply 1

pradeepde
Level 5
Level 5

I am not aware of vlan access contrel list ,but i feel that the following link will provide you more information about configuring VACL and IDSM.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a0080160a7e.html

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/idsm/idsm_1/10890_02.htm

Review Cisco Networking for a $25 gift card