12-17-2004 03:47 PM - edited 03-09-2019 09:48 AM
Hi,
Since we upgraded our 160x and 172x routers to the Firewall IOS (from IP+) we are getting Spurious Memory Access on each of them randomly but at the same address:
cisco#sh alignment
Alignment data for:
C1700 Software (C1700-K9O3SY7-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Compiled Mon 29-Nov-04 22:22 by kellythw
Total Spurious Accesses 24, Recorded 1
Address Count Traceback
36 24 0x80975B34 0x80979108 0x8095BAA4 0x8095C65C 0x803AF86C 0x803AFB88 0x803AFC3C 0x803AFD90
Any one know about this IOS bug ?
(The 160x routers are coredumping/reloading it seems they don't support reporting of this, but 172x does report)
Thanks.
12-19-2004 10:03 AM
Have you had a look at the bug navigator for version 12.3(12). Ive just had a look and there seems to be loads of memory bugs for that version.
http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl
Phil
12-19-2004 01:47 PM
Hi,
In fact I don't have access to this tool from my account, I started downgrading to 12.15.T14 and I don't get this problem anymore.
Unfortunately I still have a problem, the "Key Proc" process is using 100% cpu every hours or so, I tried to reduce rsa key but it doesn't help...
02-28-2005 12:06 AM
Hi,
We have the same issue with on 1721 with the c1700-k9o3sy7-mz.123-2.XE.bin version which often reach 100% CPU for a short period of time. This happen approximatively each hour we saw that in sh proc cpu history. We schedule a sh proc cpu each minute to see which process was impacted and it looks lie it is "Key Proc".
Do you have found any solution on this issue?
Many thanks for your help.
Regards,
Christophe/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide