04-10-2014 08:30 PM - edited 03-10-2019 12:12 AM
Folks, greetings
We are having a hard time to get 802.1x working in the following scenario:
- Windows 7
- Cisco 2960
- ACS 5.3 patch 9
- LDAP 2.4.23-32
- Samba 3.6.9-151
Apparently, everything works as expected except that when there is no user profile created on the client, the authentication fails with a message "There are currently no logon servers to service the logon request"
Anyone with experience in such an environment, that could share his findings?
Thanks in advance.
Regards,
Alvaro
04-22-2014 03:26 AM
Please use the below config. guide to configure and troubleshoot 802.1x
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/sw8021x.html
04-22-2014 07:23 AM
Hi Alvaro,
I don't think this is a network problem as such, but have a look at this microsoft article here, it looks like you may have this issue:
http://support.microsoft.com/kb/980295
Very best wishes
Mike
07-21-2014 05:37 AM
Its a windows related issue please verify :
http://support.microsoft.com/kb/139410
07-22-2014 07:28 AM
Hi,
It seems windows is unable to find the AD Domain controller to log on. Please make sure the DNS is configured properly on the PC.
Do rate if Helpful...
Regards,
Kush
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide