12-19-2013 07:54 PM - edited 02-21-2020 05:04 AM
I was hoping someone on the forums may be able to help me out with a quick request. I would like a copy of the default config that the 5512-x ships with and if it has some addressing or interface names that's fine.
Thanks!
12-20-2013 12:42 AM
This is from the config-guide:
ASA 5510 and Higher Default Configuration
The default factory configuration for the ASA 5510 and higher configures the following:
•Management interface—Management 0/0 (management).
•IP address—The management address is 192.168.1.1/24.
•DHCP server—Enabled for management hosts, so a PC connecting to the management interface receives an address between 192.168.1.2 and 192.168.1.254.
•ASDM access—Management hosts allowed.
The configuration consists of the following commands:
interface management 0/0
ip address 192.168.1.1 255.255.255.0
nameif management
security-level 100
no shutdown
asdm logging informational 100
asdm history enable
http server enable
http 192.168.1.0 255.255.255.0 management
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable management
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/intro_start.html
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
12-20-2013 06:07 AM
Thanks for the reply however what I am after is a text file dump of sh run or sh start from a fresh 5512.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide