06-10-2003 12:57 PM - edited 03-09-2019 03:37 AM
Can anyone send me a sample config or link to configure vpdn-group on router running IOS firewall/IDS?
Thanks.
06-10-2003 03:35 PM
Hi,
Please let me know if this is what you are looking for.
Thanks,
Mynul
06-11-2003 05:03 AM
--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note --
Hi Mynul,
Here's the config. I want to be able to use windows 2k builtin vpn pptp connection to dial into the router.
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname vvvvvvvvv
logging queue-limit 100
enable secret 5 --moderator edit--
!
username --moderator edit-- password 7 --moderator edit--
ip subnet-zero
no ip domain-lookup
ip dhcp excluded-address 192.168.200.1 192.168.200.19
!
ip dhcp pool 1
network 192.168.200.0 255.255.255.0
default-router 192.168.200.1
dns-server x.y.z.m
ip inspect name ethernetin cuseeme timeout 3600
ip inspect name ethernetin ftp timeout 3600
ip inspect name ethernetin h323 timeout 3600
ip inspect name ethernetin http timeout 3600
ip inspect name ethernetin rcmd timeout 3600
ip inspect name ethernetin realaudio timeout 3600
ip inspect name ethernetin smtp timeout 3600
ip inspect name ethernetin sqlnet timeout 3600
ip inspect name ethernetin streamworks timeout 3600
ip inspect name ethernetin tcp timeout 3600
ip inspect name ethernetin tftp timeout 30
ip inspect name ethernetin udp timeout 15
ip inspect name ethernetin vdolive timeout 3600
vpdn enable
!
vpdn-group 1
accept-dialin
protocol l2f
virtual-template 1
terminate-from hostname pptp
local name pptp
!
!
!
!
!
interface Ethernet0
ip address dhcp client-id Ethernet0
ip nat outside
!
interface Ethernet1
ip address 192.168.200.1 255.255.255.0
ip nat inside
!
interface Virtual-Template1
ip unnumbered Ethernet1
ip mroute-cache
peer default ip address pool pptppool
ppp authentication pap chap
!
ip local pool pptppool 192.168.200.220 192.168.200.250
ip nat inside source list 1 interface Ethernet0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet0
no ip http server
!
access-list 1 permit 192.168.200.0 0.0.0.255
!
line con 0
______________________________________________
system image file is "flash:c1600-k8osy-mz.122-16.bin"
Thanks.
06-24-2003 07:35 AM
Still cannot vpdn into this router with this config. FYI - the router is connected to a cable modem for Internet connectivity. Do I need to specify certain protocol? I ran the debug vpdn on the router, the router didn't even see the attempt. Any idea, anyone?
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide