Hi all,
I have two ASA 5540 in failover and I am trying to upgrade from the current ASA843-k8.bin to ASA846-k8.bin but when I copy the image from a FTP server, from a TFTP server or even the ASDM, I receive some errors and I can't complete the copy
Error message from a FTP:
ASA5540# copy ftp://user:password@x.x.x.x/asa846-k8.bin disk0:
Address or name of remote host [x.x.x.x]?
Source username [user]?
Source password [password]?
Source filename [asa846-k8.bin]?
Destination filename [asa846-k8.bin]?
Accessing ftp://user:password@x.x.x.x/asa846-k8.bin...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
sumval(0x904d) chksum(0x 0)md5(0x5af126d2 0x16096357 0x4f701ec0 0x99bd0ea2)
md5(0xe20e1f3a 0x552e6d94 0x912c2493 0x7ba13bac)
Checksum verification on new image failed
Error message from ASDM using the File Management:
The image is attached as error_from_asdm.jpg
It seems like the error were the image but I've verified the MD5 checksum and it is OK and I've also verified downloading and copying again the image into the disk0 but I receive the same errors. Also if you see the checksum in the text and in the file I attach you'll notice they are differents.
I will really appreciate your help to resolver this issue. Thanks
