how isp enforce user to access service with determined numbers in dial up

[holom29]

in isdn isp can enforce user to use telephone numbers

if these numbers wrong he will not be able to login

is these possible in dial up that if the user use range of numbers that isp not limit it cann't login

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[hcombee]

In ACS you can set network access restrictions in the group and user setup, first you set the "permitted calling/point of access locations" in the user setup to type CLID and value "users-phonenumber" then you set "denied calling/point of access locations" to type CLID and value "*" ,

you deny all other phone numbers to all members of the group (be carefull).