Other Security Subjects

Does Cisco concentrator have routing ability?Thanksben

All,I am running Director (2.2.2) on a Solaris system. FOr some of my sensors, when I attempt to configure them, I get an error "unable to determine the sensor type for <hostname here>, check that postofficed and packetd are running." I checked, an...

When a signature is created under SigWizMenu there is a general description of the Sig in SigUser. I often find it usefull on alerts to see what the signature is looking for. I usually read the NSDB descriptions and augment that with use SigWiz menu ...

Hi,Can the PIX support a configuration where PC clients are on the inside and the DHCP server is on the outside ? The DHCP server would need to hand out public IP's to clients on the inside, the PIX would NOT be running NAT. Is this possible ?ThanksK...

Has anyone ever tried the combine the VPN5000 client with the build in Win2k QoS. What I'm after is the possibility to 'guarantee' some bandwidth for certain traffic through the IPsec connection ....

I have a wrong host entry in the Available Network Objects - Server1 with ip address of 10.102.1.1.The server name is correct but the ip address is wrong. I can't clear this from the Available Network Objects. Does anyone know how to do this.

Does CSPM act as a SYSLOG server, or does it get SYSLOG from another server i.e. ciscoworks2k?

Why would I want my default gateway to be my firewall?

I am going to install an IDSM for a client and they are concerned how much Dram is requred for IDSM module. any advice is much appreciated.

First, I upgraded the module and did the servicepack and the Sensor version is : 3.0(3)S10 now. I am using the Cisc Secure Policy Manager ver. 2.3.3i. And did the Signature Update (CSPM-2.3.3i-S13-exe.zip)and I cannot find the Sensor Version 3.0(3)...

In Cisco's product line, which platforms can support MPLS deployment?Catalyst 4000,5000,6000 can support MPLS deployment?

I have a PIX515 (5.3.2 code) that slowly stops allowing outbound connections. We do a "sho xlate" and see an increasing # of connections are using PAT. If we do a "clear xlate", all outbound connections start working until the PAT connections start a...

I have installed the IDS Director UNIX and a 4230 sensor. How can I see the alarm in HPOV's event browser instead of open the sensor icon?

You are the network engineer of a small company. You have the following:2621 4x(Ethernet)PIX 515 4x(Ethernet)Provider1 (ISP) 64.X.X.X /24 (384/384 SDSL)Provider2 (ISP) 216.X.X.X /24 (1Mb/1Mb SDSL)LAN 192.168.1.0 /24Mail Server 192.168.1.5 /24WWW Serv...

I am using PIX515R as Firewall. Recently more and more users listen radio through Internet. Do you have know how to block users to listen radio through Internet? Thanks.