04-28-2010 04:12 PM - edited 03-09-2019 10:57 PM
Hello,
Regarding the configuration of the Cisco IOS content filtering, the certificate that needs to be downloaded from this page (http://cisco.com/en/US/products/ps5854/products_configuration_example09186a0080816c23.shtml requests the router's IP address... What happens if this is a dynamic and not a static public ip address??
Ill be grateful with any input on this..
Thanks and regards,
Solved! Go to Solution.
04-29-2010 02:52 PM
The auto cert install page asks for the ip address in order to go to the router and provision it by installing the cert on it.
So the router needs to have http enabled and then from this page you will give the ip address and the tool will ask you for the credentials on the router and will connect to it and install the cert needed.
If the ip address is dynamic it doesn't matter because you will need to install the cert only once.
I hope it helps.
PK
04-29-2010 02:52 PM
The auto cert install page asks for the ip address in order to go to the router and provision it by installing the cert on it.
So the router needs to have http enabled and then from this page you will give the ip address and the tool will ask you for the credentials on the router and will connect to it and install the cert needed.
If the ip address is dynamic it doesn't matter because you will need to install the cert only once.
I hope it helps.
PK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide