Not sure if this is possible, but I have an internal host that needs to be accessed from the outside and from my dmz. In both cases the traffic will be initiated from the other side, not the internal host. Is this possible? My config will look something like this:
static (inside,outside) 2.2.2.2 1.1.1.1 netmask 255.255.255.255
static (inside,dmz) 3.3.3.3 1.1.1.1 netmask 255.255.255.255
access-list acl_outside permit tcp any host 2.2.2.2 eq 80
access-list acl_dmz permit tcp any host 3.3.3.3 eq 80
access-group acl_outside in interface outside
access-group acl_dmz in interface dmz
Will this work and is it supported?
Thanks in advance,
Eric