NAT Issues with PAT

[mark]

Hi All

I have a lab setup to try and resolve an issue on a production network as below.

The internal switches are each site are configured with the Cisco HTTP server and these are accessible from within each site and from the remote site via a site-to-site vpn.  I have configured NAT overload for external connectivity and static nat for the web servers at each site using both 80 and 443.  The Cisco switches respond with authentication but the web pages are not displayed.

Is there something that I missing here or a know issue?

Thanks

[Farrukh Haroon]

If you reaching through the VPN, this should be transparent to this switch and should work.

Can you telnet on the 80 and 443 ports to the remote webserver?

Please post your config.

Regards

Farrukh