cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
211
Views
0
Helpful
2
Replies
Steve Graham
Beginner

No NAT DMZ web server when accessed by inside users

How can I build an exception for allowing users on the inside to access a web server on port 80 in the DMZ? They cannot do this now because, in my opinion, the server is going through a NAT to the public address, so how can I set it up where any request from the inside on port 80 to this server will not translate the server IP to a public IP (via NAT)?

1 ACCEPTED SOLUTION

Accepted Solutions
cisco24x7
Frequent Contributor

static (i,dmz) internal_net internal_net /xx

CCIE security

View solution in original post

2 REPLIES 2
cisco24x7
Frequent Contributor

static (i,dmz) internal_net internal_net /xx

CCIE security

Steve Graham
Beginner

Thank you for your reply! Success.

Create
Recognize Your Peers
Content for Community-Ad