Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I would like to get a consensus about the best way to utilize 2 ISPs on the same Internet router. We currently have an Internet router that connects 1 ISP via a multi-link across our Serial interfaces. We now have a new ISP that we would like to be...
All, I have backed myself into a corner with a command I entered yesterday in my ASA. The command entered was:aaa authorization command TACACS+ LOCAL And it locked me down so tight that I can't even go into "conf t" or run a "sh run" command any lon...
All, I am seeing some odd things in relation to how our smtp gateway is sending information out across the Internet. When I do a show xlate it shows that it is using the global PAT of our primary ISP. However, I have a static NAT assigned to it ove...
I am having trouble getting ping to work for my inside networks through my outside interface. Is there a recommended approach for allowing this to traverse from an inside interface to an outside host beyond our network?
How can I build an exception for allowing users on the inside to access a web server on port 80 in the DMZ? They cannot do this now because, in my opinion, the server is going through a NAT to the public address, so how can I set it up where any req...
The simple answer is yes, however, without the details of what you are trying to accomplish with these 3 switches, it's hard to give you the necessitites you may need prior to making your decision.I'm going to assume these 3 swtiches host 3 different...
Absolutely! Comes in handy when wanting to change configs on multiple devices in your environment, i.e. changing enable secret, updating snmp configs, etc.Enjoy.
Andy, I'm not sure by your question if you were looking for free software or simply software that does this. Solarwinds NCM is a great tool for pushing scripts to network devices. Very useful tool, however, it will take some investment to deploy, b...
To answer some of the unknowns referenced in your response:"But is it not clear whether this is different from what you do with the old ISP or is the same."Currently, all outbound and inbound traffic traverse ISP1, since it is the only ISP in our env...
Added a user in ACS with privilege level 15 access and in the Shell Command Authorization Set" section, checked "Per User Command Authorization" and then selected the "Permit" radio button. Submitted changes. Logged in as new user I just setup and ...
