02-23-2006 02:30 PM - edited 03-09-2019 02:02 PM
I have a pix 515. I have my internal network which is using a private address i.e. 192.168.2.0 and a dmz which hosts my webservers and dns servers. I need to backup the servers on the dnz using commvault but i was told that i have to create a static mapping to the commvault machine using a public address and and then open the port to the commvault machine. Is this true or is there a workaround?
Thanks for any help.
02-23-2006 03:12 PM
yes, ports need to be opened between the dmz server and the inside server for backup. however, static mapping using public ip is not necessary. you may do static mapping with private ip.
e.g.
static (inside,dmz)
static (dmz,inside)
access-list 101 permit tcp host
access-group 101 in interface dmz
02-24-2006 05:41 AM
That example is very clear. I will try it a bit later.
Thanks Jackko
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide