Problems with SA-VAM, 7200 and IOS 12.2(T)

[peter.gehrmann]

I actually have a Cisco 7200 series router for VPN tests.

I want to start with IOS 12.2(t) and a SA-VAM. The SA-VAM is not recognized by the router (Please have a look at the log). How can help.

....

IOS (tm) 7200 Software (C7200-IK9O3S-M), Version 12.2(8)T5, RELEASE SOFTWARE (f

c1)

.....

cisco 7204VXR (NPE225) processor (revision A) with 114688K/16384K bytes of memory.

Processor board ID 28341357

R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache

4 slot VXR midplane, Version 2.6

.....

00:00:05: %PA-2-UNDEFPA: Undefined Port Adaptor type 650 in bay 1

00:00:05: %PA-3-DEACTIVATED: port adapter in bay [1] powered off.

[edadios]

There is no code on 12.2T line that supports the VAM yet.

You would have to use 12.1.9E and higher in the 12.1E line code.

Regards,

[peter.gehrmann]

First of all, thank you for the information.

Is is response valid also for other routers like the 7100 series router?

Background: My company is a retailer with 600 store in Europe. We running actually a succesful test with 11 stores connected via Internet VPNs with our companies backbone. We want to migrate 200 stores next spring. Now we are looking for a VPN platform capable to run up 1000 tunnels and app. 30 Mbit/s and more 3DES throughput. The 12.2T high availability features and reverse route injection are a must.

Regards

[edadios]

It is basically for VAM. Support for 12.2T line is not yet out. So whichever router, the same applies for now. I suggest you contact you local marketing contact to push for release.

Regards,