08-07-2012 03:30 AM
Hi All,
does anyone knows step by step how to disable the "beep" sound on MSP?
Thanks,
Marcel
Solved! Go to Solution.
08-07-2012 03:39 AM
Hi Marcel,
If the alarm is coming from the MegaRAID, you can either:
Browse to the server's VSMC web page (http://
or
ssh into the server and use this command:
/opt/MegaRAID/MegaCli/MegaCli -adpsetprop AlarmSilence -aALL
Sincerely,
Dirk Christeaens
08-07-2012 03:39 AM
Hi Marcel,
If the alarm is coming from the MegaRAID, you can either:
Browse to the server's VSMC web page (http://
or
ssh into the server and use this command:
/opt/MegaRAID/MegaCli/MegaCli -adpsetprop AlarmSilence -aALL
Sincerely,
Dirk Christeaens
08-10-2012 12:44 AM
Hi Dirk,
Thanks man
one more question, is there any other thing besides raid/power causing the server to generate the alarm?
Thanks,
Marcel
08-10-2012 01:11 AM
Hi Marcel,
During the Power-On Self-Test (POST), the BIOS will check for problems. If a problem is found, the BIOS will activate an alarm, turn on LED indicators or display a message on the monitor.
For example these are know to result in audible alerts:
1 long and two short beeps - video configuration error
1 continuous long beep - overheat (Overheat LED will be on)
1 long beep and 1 short pause - memory not detected
There may be others as well. For example, a problem with the keyboard (like stuck key) may also result in an audible alert.
Best is to check the POST error on the monitor and/or check the system LEDs if you want to be sure what's causing the alert.
Sincerely,
Dirk Christeaens
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: