FWSM - AAA Authorization

[tckoon]

How to map this command from IOS to FWSM ?

I want user when login and authenticated, it right way go direct to exec mode. No problem at IOS but , not sure how to configure it on FWSM or PIX Firewall.

aaa authentication enable default enable none

aaa authorization exec default group tacacs+ if-authenticated

[didyap]

The configuration on the FWSM for AAA will be same as would be on a normal PIX. The documents have more details about the same.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_62/config/mngacl.htm

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmdqref.htm

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/ab.htm