I am trying to put back a NAT configuraton that I already had configured at one point, but had to delete.
This was how it was configured before deletion:
Object network obj-198.100.100.12
Nat (inside,outside) static 206.248.224.18
I have tried to put this back on the ASA, but it keeps giving me the following error:
tbhasaop(config)# object network obj-198.100.100.12
tbhasaop(config-network-object)# nat (inside,outside) static 206.248.224.18
ERROR: empty object/object-group(s) detected. NAT Policy is not downloaded
If anyone can tell me why this behavior is occuring I would be grateful.
Thank You
Kevin
