Hi
I need to enter the config below on one of our core switches -
interface vlan 602
description *** HOTEL_TRANS ***
ip address 10.90.202.252 255.255.255.0
ip access-group ACL_HOTEL_TRANS in
standby 602 ip 10.90.202.254
standby 602 timers 1 4
standby 602 priority 100
standby 602
When I enter this I get the message that 10.90.202.0 overlaps with vlan10. The switch vlan 10 config is below -
interface Vlan10
description Hotel-User-VLAN-1
ip address 10.90.1.197 255.255.0.0
no ip redirects
standby 10 ip 10.90.0.22
standby 10 priority 105
standby 10 preempt
Any assistance would be appreciated.
Thanks
