Hello,
I'm trying to find some kind of 3g modem that actually works with the RV215W router.
Without luck so far.
Huawei E1752 - not working, but ok, it is not on the supported modems list.
Huawei E372 - not working, it is on the list but under the T-mobile Germany and not T-mobile Poland so ....
Huawei E173 - not working, it is on the list as supported !!!
Does this router work with any kind of 3g modem at all ?
This is what I see in the logs after connecting E372:
2013-07-14 20:36:20 RV215W kern.info usb 1-1: new high speed USB device using ehci_hcd and address 12
2013-07-14 20:36:20 RV215W kern.info usb 1-1: configuration #1 chosen from 1 choice
2013-07-14 20:36:20 RV215W kern.info option 1-1:1.0: GSM modem (1-port) converter detected
2013-07-14 20:36:21 RV215W kern.info usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
2013-07-14 20:36:21 RV215W kern.info option 1-1:1.1: GSM modem (1-port) converter detected
2013-07-14 20:36:21 RV215W kern.info usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
2013-07-14 20:36:21 RV215W kern.info option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
2013-07-14 20:36:21 RV215W kern.info option 1-1:1.0: device disconnected
2013-07-14 20:36:22 RV215W kern.info usb 1-1: USB disconnect, address 12
2013-07-14 20:36:22 RV215W kern.info option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
2013-07-14 20:36:22 RV215W kern.info option 1-1:1.1: device disconnected
2013-07-14 20:36:22 RV215W user.debug syslog: WANMGN_AC_REMOVE:
2013-07-14 20:36:22 RV215W daemon.info udhcpc[2724]: Performing a DHCP renew
2013-07-14 20:36:27 RV215W kern.info usb 1-1: new high speed USB device using ehci_hcd and address 13
2013-07-14 20:36:28 RV215W kern.info usb 1-1: configuration #1 chosen from 1 choice
2013-07-14 20:36:28 RV215W kern.info scsi10 : SCSI emulation for USB Mass Storage devices
2013-07-14 20:36:28 RV215W kern.debug usb-storage: device found at 13
2013-07-14 20:36:28 RV215W kern.debug usb-storage: waiting for device to settle before scanning
2013-07-14 20:36:28 RV215W kern.info scsi11 : SCSI emulation for USB Mass Storage devices
2013-07-14 20:36:28 RV215W kern.debug usb-storage: device found at 13
2013-07-14 20:36:28 RV215W kern.debug usb-storage: waiting for device to settle before scanning
2013-07-14 20:36:33 RV215W kern.notice scsi 10:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
2013-07-14 20:36:33 RV215W kern.debug usb-storage: device scan complete
2013-07-14 20:36:33 RV215W kern.notice scsi 11:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
2013-07-14 20:36:33 RV215W kern.notice sd 11:0:0:0: [sda] Attached SCSI removable disk
2013-07-14 20:36:33 RV215W kern.debug usb-storage: device scan complete
This is what I see in the logs after connecting E173:
2013-07-15 00:48:21 RV215W user.debug syslog: HOTPLUG ADD: 3G 1011: add usb bus#=1, dev#=4, intf#=0, cls#=8, VID=0x12d1 PID=0x1446
2013-07-15 00:48:22 RV215W user.debug syslog: WANMGN_AC_REMOVE:
2013-07-15 00:48:22 RV215W user.debug syslog: HOTPLUG ADD: 3G 1014: add usb bus#=1, dev#=4, intf#=0, cls#=8, VID=0x12d1 PID=0x1446
2013-07-15 00:48:22 RV215W daemon.info udhcpc[904]: Performing a DHCP renew
2013-07-15 00:48:26 RV215W kern.info usb 1-1: new high speed USB device using ehci_hcd and address 5
2013-07-15 00:48:26 RV215W kern.info usb 1-1: configuration #1 chosen from 1 choice
2013-07-15 00:48:26 RV215W kern.info option 1-1:1.0: GSM modem (1-port) converter detected
2013-07-15 00:48:26 RV215W user.debug syslog: Not support this USB Dongle. (Vendor ID 0x12D1, Product ID 0x140C)
2013-07-15 00:48:26 RV215W kern.info usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
2013-07-15 00:48:26 RV215W kern.info option 1-1:1.1: GSM modem (1-port) converter detected
2013-07-15 00:48:26 RV215W kern.info usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
2013-07-15 00:48:26 RV215W user.debug syslog: HOTPLUG ADD: 3G 1029: add usb bus#=1, dev#=5, intf#=0, cls#=255, VID=0x12d1 PID=0x140c
2013-07-15 00:48:26 RV215W user.debug syslog: Not support this USB Dongle. (Vendor ID 0x12D1, Product ID 0x140C)
2013-07-15 00:48:27 RV215W user.debug syslog: Not support this USB Dongle. (Vendor ID 0x12D1, Product ID 0x140C)
2013-07-15 00:48:27 RV215W kern.info option 1-1:1.2: GSM modem (1-port) converter detected
2013-07-15 00:48:27 RV215W kern.info usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
2013-07-15 00:48:27 RV215W kern.info option 1-1:1.3: GSM modem (1-port) converter detected
2013-07-15 00:48:27 RV215W kern.info usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
2013-07-15 00:48:27 RV215W kern.info usb-storage: device ignored
2013-07-15 00:48:27 RV215W kern.info usb-storage: device ignored
2013-07-15 00:48:26 RV215W user.debug syslog: HOTPLUG ADD: 3G 1035: add usb bus#=1, dev#=5, intf#=0, cls#=255, VID=0x12d1 PID=0x140c
2013-07-15 00:48:27 RV215W user.debug syslog: Not support this USB Dongle. (Vendor ID 0x12D1, Product ID 0x140C)
2013-07-15 00:48:26 RV215W user.debug syslog: HOTPLUG ADD: 3G 1041: add usb bus#=1, dev#=5, intf#=0, cls#=255, VID=0x12d1 PID=0x140c
2013-07-15 00:48:26 RV215W user.debug syslog: HOTPLUG ADD: 3G 1046: add usb bus#=1, dev#=5, intf#=0, cls#=255, VID=0x12d1 PID=0x140c
2013-07-15 00:48:27 RV215W user.debug syslog: WANMGN_AC_WANPORT_UNPLUG::!!card_op = no null
2013-07-15 00:48:27 RV215W user.debug syslog: HOTPLUG ADD: 3G 1054: add usb bus#=1, dev#=5, intf#=0, cls#=8, VID=0x12d1 PID=0x140c
2013-07-15 00:48:27 RV215W user.debug syslog: HOTPLUG ADD: 3G 1051: add usb bus#=1, dev#=5, intf#=0, cls#=8, VID=0x12d1 PID=0x140c
2013-07-15 00:48:34 RV215W user.debug syslog: <<<< Maybe usb card has not been inited yet. >>>>
2013-07-15 00:48:35 RV215W user.debug syslog: Init USB 3G card_param NO SUPPORT failed
2013-07-15 00:48:35 RV215W user.debug syslog: Not support this USB Dongle. (Vendor ID 0x12D1, Product ID 0x140C)
Please help me with this.
