cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

RV110W Site to Site VPN keeps dropping off

richardPBS
Level 1
Level 1

Good morning,

This is my first post and I hope that someone can give me some advice or help.  I've got two sites both using RV110w routers over a BT line.  They're successfully connecting over the site2site VPN using the Cisco control panels IP sec etc.  However the connections drop after a day or so and do not re-establish themselves whenever a connection is attempted from a PC on either Lan over the WAN (ie. devices on one lan are xxx.xxx.2.x to xxx.xxx.3.x on the other site).  If I enter the advanced VPN page on the router control panel/config and prompt to attempt to re-establish the connection it fails, the error log states that the connection fails due to "no connection has been authorized with policy=PSK 8".  If I make no changes to any settings, but save the page and then try to re-establish the connection this works and continues to work for a day or so. This is happening consistently over a two week period.  All settings on both routers for IP sec etc are identical, that fact that it will connect confirms that the policies etc must be aligned at some point. 

I've been searhcing the forums and Google bit couldn't find a similar position or help that fixed the problem.

Does anyone have any ideas about what would be causing this happen (ie. is it a router setting that I've missed), is it to do with BT, or the automatic adjustment of time on the LANS, or any other ideas or fixes to similar problems would be welcome.

Many thanks.

Who Me Too'd this topic