Hi,
I apologise if this question has been answered already, I tried searching but found nothing.
I have a Cisco 3850X and an ASA5525 firewall, and I want to create a specific route from a particular VLAN in order to filter the traffic.
I am using VLAN 15, which is intended for wireless access only.
I want to;
Route all wireless hosts traffic on VLAN 15 to the firewall for filtering through two physical interfaces grouped together in a channel-group
Route filtered traffic back from the firewall into the same switch via the same channel-group (same physical interfaces.)
Allow filtered traffic to communicate with other VLANs via their gateways
If somebody could point me in the right direction with this I would appreciate it. I have attached a drawing of the physical cabling to give you a better idea of how the equipment is connected.
Thank you.
