Hello All,
I have recently configured a 5506 with a firepower module. When attempting to connect to the module via ASDM, I am getting the error "Cannot connect to ASA Firepower module. Check that it is correctly configured and on the network..." I have made sure that the management port is connected to the same L2 switch that the ASA is connected to, and the IP is set to the same subnet as the Data(LAN) port.
Can anyone possibly throw out some suggestions on what may be the cause of not being able to connect to the firepower module? I'm assuming it is something simple, however as this is my first deploy I would greatly appreciate any input.
I have included a screenshot of the error I am getting, as well as the 'show network' output from the sfr module.
Thanks.
Justin
