12-07-2015 12:46 AM - edited 03-12-2019 05:50 AM
Hi team,
I have a failover Cisco ASA 5525x with SFR module with ip configured working through ASA management 0/0 (is our Backup SFR)
It is connected to an access switch port.
It was working as expected and I was able to ping the IP until a week ago. For a week now I can't ping the SFR IP and is not working anymore.
I tried the following:
-> change ethernet cable with no luck.
-> reset switch port with no luck.
-> assigned on a differenet switch on the network the configuaration and connecting there but again no luck.(I have to mention that in switch mac address table I can't see the ASAs interface for SFR for some reason.)
Also the switch port delays to come up where it is connected. And if eventially does come up it doesn't communicate.
The strange think is that when i connect my laptop back to back with the ASAs interface management 0/0 i can ping the IP i have assigned to it and i'm able to connect to SFR module.
Any help will be appreciated:-)
Thanks in advance.