10-12-2016 11:23 AM - edited 03-12-2019 01:23 AM
We are currently running an FTD evaluation in our test environment and running into a small, but annoying issue. We are unable to ping from a host on the inside on the inside to an IP on the internet (8.8.8.8 for example), I simply get "request timed out" from the host. I am however able to browse the web over the FTD. The only only thing I have found that stands out are the counters in NAT:
1 (inside) to (outside) source dynamic Broadmoor interface
translate_hits = 3005, untranslate_hits = 2895
The untranslate_hits increases only when I ping from the inside out to the internet. I've looked over the NAT setup and everything looks correct. We had access to the beta of 6.1 in the past (with the same setup) and this was not an issue. Was something added to the live release that I am missing?
Solved! Go to Solution.