10-22-2017 12:23 PM - edited 03-21-2019 10:57 AM
One SG300-28PP Setup as L3 mode
Firmware - 1.4.8.6 / IP = 10.0.0.6
VLAN 1 - 10.0.0.6 255.255.255.0
VLAN 8 - 10.0.8.99 255.255.255.0
VLAN 18 - 10.0.18.99 255.255.255.0
VLAN 88 - 10.0.88.99 255.255.255.0
Gi5-8 as trunk port, with tagged vlan 8 & 18
create static route 10.0.0.0/24 via10.0.8.1 & 10.0.8.0 via 10.0.0.2. However it shows inactive.
How can I reach vlan 8 from vlan 1 and also allow vlan 8 to talk to vlan 1?
Not network expert here, please help.
Thanks,