12-23-2017 08:15 PM - edited 02-21-2020 07:01 AM
I started off by upgrading my ASA 5506-x with ASDM 7.9(1) and ASA 9.9(1). After a reboot the Firepower section in the ASDM was missing. No problem, I thought I would just reload the SFR and reconfigure. I loaded the SFR boot image ver asasfr-5500x-boot6.2.2-3.img. I reconfigured an IP address and started a FTP download of asasfr-sys-6.2.2-81.pkg. It uncompressed and started the install just fine. Then it gets to the DB setup section of the install. I receive the following:
Mod-sfr 581> ************ Attention *********
Mod-sfr 582> Initializing the configuration database. Depending on available
Mod-sfr 583> system resources (CPU, memory, and disk), this may take 30 minutes
Mod-sfr 584> or more to complete.
Mod-sfr 585> ************ Attention *********
Mod-sfr 586> Executing S09database-init
Mod-sfr 587> backing up existing firstboot.S09database-init
Mod-sfr 588> '/var/log/firstboot.S09database-init' -> '/var/log/firstboot.S09database-init.1514
Mod-sfr 589> 084677'
Mod-sfr 591> [FAILED]
Mod-sfr 592> Executing S11database-populate
Mod-sfr 593> backing up existing firstboot.S11database-populate
Mod-sfr 594> '/var/log/firstboot.S11database-populate' -> '/var/log/firstboot.S11database-popul
Mod-sfr 595> ate.1514084890'
Mod-sfr 597> [FAILED]
Mod-sfr 598> Executing S12install_infodb
Mod-sfr 599> DB error - will retry: Cannot connect to DB at /usr/local/sf/lib/perl/5.10.1/SF/SF
Mod-sfr 600> DBI.pm line 592.
Mod-sfr 601> DB error - will retry: Cannot connect to DB at /usr/local/sf/lib/perl/5.10.1/SF/SF
Mod-sfr 602> DBI.pm line 592.
Mod-sfr 603> DB error - will retry: Cannot connect to DB at /usr/local/sf/lib/perl/5.10.1/SF/SF
Mod-sfr 604> DBI.pm line 592.
Mod-sfr 605> DB error - will retry: Cannot connect to DB at /usr/local/sf/lib/perl/5.10.1/SF/SF
Mod-sfr 606> DBI.pm line 592.
Mod-sfr 607> DB error - will retry: Cannot connect to DB at /usr/local/sf/lib/perl/5.10.1/SF/SF
Mod-sfr 608> DBI.pm line 592.
Mod-sfr 609> DB error - will retry: Cannot connect to DB at /usr/local/sf/lib/perl/5.10.1/SF/SF
Mod-sfr 610> DBI.pm line 592.
Mod-sfr 611> DB error - will retry: Cannot connect to DB at /usr/local/sf/lib/perl/5.10.1/SF/SF
Mod-sfr 612> DBI.pm line 592.
Mod-sfr 613> DB error - will retry: Cannot connect to DB at /usr/local/sf/lib/perl/5.10.1/SF/SF
At this point it just repeats the error at line 592 and eventually restarts the install over after a timeout period.
Does anyone have information of what might be going on here? Any help would be appreciated.
Solved! Go to Solution.