Hello,
I am a bit confused about how to configure remote access for the FXOS. The doc below states to use a data interface and not the Management 1/1 interface to remotely access the FXOS. Does that mean I will need to configure a dedicated physical interface with and IP address and add http, ssh, and snmp to the access-list? What else will need to configure besides just configuring a data interface?
Thanks, ~zK
https://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/fp2100/asa-2100-gsg/getting-started.html
" Configure Management Access for FXOS on Data Interfaces
If you want to manage FXOS on the Firepower 2100 from a data interface, you can configure SSH, HTTPS, and SNMP access. This feature is useful if you want to manage the device remotely, and you want to keep Management 1/1 on an isolated network. You can continue to use Management 1/1 for local access; you cannot allow remote access from Management 1/1 for FXOS at the same time as forwarding traffic to the ASA data interfaces because you can only specify one gateway. By default, the FXOS management gateway is the internal path to the ASA.
The ASA uses non-standard ports for FXOS access; the standard port is reserved for use by the ASA on the same interface. When the ASA forwards traffic to FXOS, it translates the non-standard destination port to the FXOS port for each protocol (do not change the HTTPS port in FXOS). The packet destination IP address (which is the ASA interface IP address) is also translated to an internal address for use by FXOS. The source address remains unchanged. For returning traffic, the ASA uses its data routing table to determine the correct egress interface. When you access the ASA data IP address for the management application, you must log in using an FXOS username; ASA usernames only apply for ASA management access.
You can also enable FXOS management traffic initiation on ASA data interfaces, which is required for SNMP traps, or NTP and DNS server access, for example. By default, FXOS management traffic initiation is enabled for the ASA outside interface for DNS and NTP server communication (required for Smart Software Licensing communication)."
