05-02-2017 11:55 PM - edited 03-01-2019 04:37 AM
Hi everyone,
After successfully provisioning a new switch from APIC-EM, I see in the switch logs that there is a lot of error messages "error opening tftp://..", and wonder if this is common, and if so, is there any way to remove it? Is it related to the PnP profile?
I guess these errors are no big deal, but it would been nice to avoid them.
May 3 2017 08:30:30.363 CEST: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cisconet.cfg) failed
%Error opening tftp://255.255.255.255/switch-confg (Timed out)
May 3 2017 08:31:05.498 CEST: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/switch-confg) failed
%Error opening tftp://255.255.255.255/switch.cfg (Timed out)
May 3 2017 08:31:29.588 CEST: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/switch.cfg) failed
%Error opening tftp://255.255.255.255/network-confg (Timed out)
May 3 2017 08:40:54.499 CEST: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/network-confg) failed
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
May 3 2017 08:41:18.578 CEST: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cisconet.cfg) failed
%Error opening tftp://255.255.255.255/switchconfg (Timed out)
May 3 2017 08:41:53.727 CEST: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/switch-confg) failed
%Error opening tftp://255.255.255.255/switch.cfg (Timed out)
May 3 2017 08:42:17.828 CEST: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/switch.cfg) failed
Solved! Go to Solution.