09-30-2019 01:15 AM
Hello everyone.
Following this https://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/RV260/Quick_Start_Guide/EN/RV260_qsg_en.pdf
user guide procedure, I have just used a paper clip to restore factory setting on RV260. The result is, bricked device. After restoring factory settings, it seems that web interface does no longer exist. Device displays only default Apache page. Serial console in this device never worked. Is it possible to access specific address in web browser in order to get into configuration?
Or the only option in such situation is sending device to service?
Solved! Go to Solution.