cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Cisco RV340 | CPU 100%

knollknows
Level 1
Level 1

I am experiencing severe network degradation on client machines and I am having extreme delays to access the admin console of the router.  From a client side perspective, some sites are appearing to load slowly and I am noticing some lag. My environment consists of ~~30 devices from Xbox, PCs and IoT devices.  I reviewed the Cisco "summary" page an I see 100% CPU utilization.  I configured  syslog to a remote server and enabled "debugging". I can share my findings as required. 

 

I did see some other posts of other users experiencing similar issues and I also can confirm that a reboot will resolve this issue for roughly ~~8 hrs.  I have done a router reset and reconfigured all options to rule out a stuck config from a router upgrade. I did try out the suggested "peer solutions" to lower the IPS/IDS options to "balanced" however this had no impact. 

 

 

 

 

 

Model: Cisco RV 340

Firmware:

 
Serial Number:OMITTED
System Up Time:0 Days 22 Hours 27 Minutes 11 Seconds
Current Time:2019-Dec-13, 07:49:18 PST
CPU/Memory Usage:100% / 37%
PID VID:RV340-K9 V01
Firmware Information 
Firmware Version:1.0.03.16
Who Me Too'd this topic