03-24-2020 09:18 AM
I bought a RV260 for VPN connections recently, firmware 1.0.00.17, and I try to config VPN PPTP since 3 days, as I often did it before. Even the easiest way to connect with VPN PPTP is not possible, because of the following error.
2020-Mar-24, 16:55:32 AZOT | error | vpn | pptp: RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf |
2020-Mar-24, 16:55:32 AZOT | error | vpn | pptp: rc_read_config: can't open /etc/radiusclient/radiusclient.conf: No such file or directory |
I have no RADIUS configured (NO Remote Authentication Service)!
The problem seams to be well known with other routers, however unsolved!
Other VPNs e.g. IKE2 does not work either.
Does anyone know a solution for this problem?
Thanks for any help!
Serial Number | DNI2314A22H |
System Up Time | 0 days 4 hours 14 minutes 55 sec |
Current Time | 2020-Mar-24, 17:05:21 CET |
PID VID | RV260-K9 V01 |
Firmware Version | 1.0.00.17 |
Firmware MD5 Checksum | 7e7f47aca77c363a0b440ff3ffe5f6ae |
Locale | English |
Language Version | 1.0.0.0 |
Language MD5 Checksum | d901cc97ae6a606564195bb34fc2d4d2 |