Hi,
I'm trying to get Subinterfaces created via FMC RestAPI but always receiving "BadRequest" response.
There is something not adding up which is the fact, "subinterfaces" is available under the "devicerecords", however this is an HA Pair. I've selected device ID for "Active" but still doesn't make a difference.
This is the URI,
/api/fmc_config/v1/domain/e276abec-e0f2-11e3-8169-6d9ed49b625f/devices/devicerecords/34db7df4-c27b-11e8-9c88-a8166172884a/subinterfaces?bulk=false
Where "34db7df4-c27b-11e8-9c88-a8166172884a" is the HA Active device ID returned on the "GET".
{
"description": "Aaaaaaa-FW",
"type": "SubInterface",
"enabled": true,
"MTU": 1500,
"mode": "NONE",
"subIntfId": 105,
"ipv4": {
"static": {
"address": "192.168.0.1",
"netmask": "25"
}
},
"ifname": "Aaaaaaa-FW",
"managementOnly": false,
"enableAntiSpoofing": true,
"securityZone": {
"id": "88ca6be8-7e52-11ea-8a1c-71c9f258920c",
"type": "SecurityZone"
},
"vlanId": 105,
"fragmentReassembly": false,
"name": "Port-Channel1"
}I've confirmed the SZ ID "88ca6be8-7e52-11ea-8a1c-71c9f258920c" is correct via the GET Method in Objects/SecurityZones. Also maybe important to refer I'm trying to add sub-interface to an EtherChannel.
Any suggestions what I'm doing wrong?
Thanks,
