Hi
I operate two RV042G and wanted to do the latests Firmware update on them. Because I lost the PW, I did a full reset on one the first unit (30sec Reset hold) then logged in with the default user/pw which was fine. Next I run the firmware update from within the RV042G web gui to update to 4.2.3.10. Didn't run through... After that nothing worked except the recovery via tftp process with the former Firmware 4.2.3.9!
TFTP with 4.2.3.10 crashes the RV042G
TFTP with 4.2.3.9 (working) and then run the update process for 4.2.3.10 again crashes the RV042G. It simply locked me out! After the Firmware Update I was not able again to log in for the web server GUI.
By now, 3times of a Firmware Update for 4.2.3.10 failed and I believe that this latest update has a serious problem.
Any help or "newer" version for the RV042G? Always needed to recover via TFTP process being very time consuming...
best regards, Thom
PS) didn't try the second unit yet, as we need that one operational without long service break....
but I am quit sure it will not behave different
