Hi all,
I have run in to a weird issue with the FPR1010.
When connecting a client machine to the inside network, I can browse some but not all web sites. The particular problem is my 'test' site of www.bbc.co.uk.
However, rather unbelievably, it will work when using WiFi, but not when cabled.
To clarify;
Laptop -> SF200 switch -> FPR1010 -> OpenReach modem to FTTP, result: doesn't work to www.bbc.co.uk nor royalmail.com but does to other https sites
Laptop -> CBW240 access point -> SF200 switch -> FPR1010 -> OpenReach modem to FTTP, result: works fine with apparently all sites.
To further clarify - not talking about WiFi on the firewall here - just an AP elsewhere on the network.
There are no restrictive rules on the FPR, everything is open/allowed. In fact it only has a base licence so shouldn't be URL filtering.
Latest s/w with latest patch.
Replacing the FPR with a Cisco RW134 router (that I happen to have in my toolbox).... all works fine via cable or WiFi.
I have the FPR back here for more tests - but before I deployed it, I am 100% it worked via a cabled connection. The only difference I can see is that my previous tests were with a 'WAN' being our office network whereas the real WAN on site is an FTTP connection. My test will be with DHCP on the FPR, on site, it is PPPoE for the WAN side.
Any clues?
