Hello Everyone,
I tried to boot the latest stable IOS XE image (c1100-universalk9.17.09.04a.SPA.bin) from Cisco site on a 1121 router, but failed due to Integrity check. The MD5 checksum in the Cisco site and the downloaded file matches correctly.
I keep the boot sequence from the more recent image to the file which came along with the device as below. But the router is not able to load the first 2 images and once we get to ROMMON mode and enter boot> command, it takes the default image (17.02.02.SPA.bin).
boot-start-marker
boot system flash:c1100-universalk9.17.09.04a.SPA.bin
boot system flash:c1100-universalk9.17.09.03a.SPA.bin
boot system flash:c1100-universalk9.17.02.02.SPA.bin
boot-end-marker
Any suggestions on this will be much helpful.
Logs:
........
Located c1100-universalk9.17.09.04a.SPA.bin
######################################################################################################################################################################################Truncated output
############
Package header rev 3 structure detected
IsoSize = 413193820
Performing Integrity Check ...
Integrity Check Failed:
calculated 99499E11:5A0A1401:2C05A45F:C5E53D06:A388B738
expected 1827E115:5DC90705:310321F2:9EDE3F02:3FEF5741
Failed to boot file flash:c1100-universalk9.17.09.04a.SPA.bin
Best Regards,
Rajesh Kumar
