Scenario....
I have 2 switches (Switch A and Switch B), they are connected together via a TRUNK allowing vlan 10 and 20 to traverse between them. I want to insert an FTD between the switches in transparent mode. I'm having a heck of a time finding documentation or an example of how to do this when the switches are connected via a trunk. Doing this with a routed link between routers is easy and its also easy if the link between the switches was an access port with a single vlan, then I'd use a BVI. I've messed around with the configuration in FMC for hours and haven't been able to come up with anything that works. Anyone have any experience with this?
Any help would be greatly appreciated.
Thanks,
Mark
