07-29-2016 11:28 PM
Hi guys,
i'm Alberto and i need your help.
I was doing some test on my router Cisco 1921 - ipsec configuration.
To stop the evaluation time, i wrote the command:
license boot module c1900 technology-package securityk9 disable
end
write
reload
Now the router goes always in rommon prompt.
I tried to give another ios without good results...
Below it is what brought me back:
System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.
Total memory size = 512 MB
CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled
Readonly ROMMON initialized
program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0
IOS Image Load Test
___________________
Signature did not verify
Signature DID NOT VERIFY
boot: cannot load "usbflash0:"
Readonly ROMMON initialized
rommon 1 >
Signature DID NOT VERIFY
boot: cannot load "usbflash0:c1900-universalk9-mz.SPA.152-2.T.bin"
Please, can someone help me?
Thanks in advance!!!
Bye!! Alberto
07-29-2016 11:32 PM
boot: cannot load "usbflash0:c1900-universalk9-mz.SPA.152-2.T.bin"
Uhhhh ... This issue has NOTHING to do with license. The router couldn't boot the IOS that was supposed to be found in the USB drive.
Post the complete output to the following command:
1. dir flash:
2. dir usbflash0:
07-30-2016 12:27 AM
This is output:
rommon 1 > dir flash:
program load complete, entry point: 0x80903000, size: 0x4c4a0
Directory of flash:
2 65229700 -rw- c1900-universalk9-mz.SPA.152-2.T.bin
rommon 2 > dir usbflash0:
program load complete, entry point: 0x80903000, size: 0x4c4a0
Directory of usbflash0:
2 65229700 -rw- c1900-universalk9-mz.SPA.152-2.T.bin
07-30-2016 12:56 AM
Try this command from ROMmon: boot flash:c1900-universalk9-mz.SPA.152-2.T.bin
07-30-2016 01:24 AM
i've already done... but nothing... even with another ios..
rommon 11 > boot flash:c1900-universalk9-mz.SPA.152-2.T.bin
program load complete, entry point: 0x80903000, size: 0x4c4a0
IOS Image Load Test
___________________
Signature did not verify
Signature DID NOT VERIFY
boot: cannot load "flash:c1900-universalk9-mz.SPA.152-2.T.bin"
07-30-2016 04:25 AM
Try a different IOS, preferably an "M" train.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide