Cisco RV082 VPN

[cjj000001]

Hello, I have a Cisco RV082 and it has configured 12 Gateway to Gateway VPNs.

I establish a connection with Cisco Quick VPN Client to RV082 to access the remote VPN gateways and I only can see the devices connected to RV082 LAN.

How I can see the other routers that are configured in VPNs?

The router is configured as Gateway mode, the Firewall is enabled with any traffic allowed, and the RIP is disabled.

Thanks.

[cchamorr]

Hello, 

You won't be able to accomplish this using QuickVPN mostly for 2 reasons: The router is no meant to allow this communication and second, when you connect via Quic the remote PC doesn't get an address.

I think you need to configure the PPTP connection as it will give the remote client an IP address on the same LAN of the RV082 and then you will be able to reach the other sites.

I hope this helps.