RV130W now setup as a VPN server , and client running with Windows 7.
Windows 7 connected to RV130W with PPTP , all is working as expected , Windows 7 can access all internal resource and access internet , and RV130W as the VPN client gateway by default.
For security reason , I want all traffic pass through VPN and use IPSec to replace PPTP , I have changed the router setting to IPSec , Windows 7 used greenbow to replace the native VPN client. Greenbow enabled split-tunneling as default , so I can access internal resource after connected IPSec VPN but access internet by local gateway. Because I want all traffic pass through RV130W, I have disabled the split tunneling function from greenbow, after that I can not access internet again, but still can access internal resource.
Any idea about this case ?
Router setting:
Phase 2:
IP address :192.168.0.0.
Subnet mask : 255.255.255.0
VPN client : Windows 7 network environment :
IP: 192.168.42.187/24
Gateway:192.168.42.129
(After connected IPSec VPN)
IP: 10.10.10.10/24
Gateway : 10.10.10.1
Greenbow Setting :
Disable Split Tunneling
VPN Client address: 0.0.0.0
Address type : Subnet address
Remote LAN address : 192.168.0.0
Subnet mask : 0.0.0.0
Thank you
Kenny Huen
