how configure router for one internet provider

[igors_petersons]

Just bought a router RV042G for commpany. Why does the router configuration requires two IP addresses for the two ISPs. What if we only have one ISP?

How should i corectly configure router for one ISP (internet provider)

Plese need ugent help!

[The_Peacedog]

Hi Igors, could you provide some more information about your connection? Is your ISP static, dhcp, pppoe, etc.

[igors_petersons]

Hi, The peacedog.

we have static ip adreess.

I have a little problems with this rotuer. Could you plese help to configure it correctly.

we have 100 mb internet conection with one static ip.

rotuer RV042G

switch: Cisco SF100-24 24-Port 10/100 Switch

16 pc and 2 samsung network printers.

Today i come to work and two pc had not internet conecction but had access to local network. other worked just fine. I tried to resset router and network stpped work at all. I tried factory default and backup restore config, it doesnot helped. So for luck i had wirelles router tp link and i replaced it and now all works just fine, but slow.

Plese help. i am not IT specialist. How should i configure this router to work corectly?

Before I noticed in system log many conection refuse notices to dropbox and to other services, how to solve that?

P>S could you suggest how to make subnet and conect to it tp link wireless router for guests so that they dont see local network.

[The_Peacedog]

We should address one problem at a time, get that solved, then move on to the next. First it sounds like you had some internet connectivity issues. If the majority of the machines, (16 correct?) had no internet issues, I would think there isn't anything wrong with the router configuration. My first assesment would be at the machines with the problems, do they have static ip addresses assigned, proxy issues, firewall issues, host file problems, etc.

I would try a factory reset of the router, then set it up again from scratch, without a backup config file. If there is a problem with the configuration, restting and uploading the old config file is likely to give you the same problem as before. Once that's done, investigate the machines with the issues to be certain that the problem isn't a localized one.

I would suggest getting the rv042g up and running properly before attempting set up of a guest network.

[hungvt001]

hi Igors,

can you let me see your config RV042G conntect to ISP

thanks