How would you go about this set up?

[alexten1983]

I have a 5 public ip address's. And I have 2 web servers. Both web servers are behind RV340. 1 is on vlan10 and another is on vlan20. Now the RV340 has 1 of the 5 ip address's assign to it. And I have port forwarding (80) to one of the web servers. What is the best way to get second web server port (80) on a public ip address remaining on it private ip address? Without changing its port.

[alexten1983]

OK I think one to one nat would be the case. But not sure how it is set up. Let say my wan is set up like this.

ip: xx.xx.xx.242

subnet: 255.255.255.248

default: xx.xx.xx.241

And its pointing to 192.168.1.10

Now I have this left xx.xx.xx.240, 243, 244

I want to point xx.xx.xx.240 to 192.168.1.9 port 80

so in on to one nat I would do this xx.xx.xx.240 to 192.168.1.9 port 80?

If so how by doing so would bring that ip address online? as my wan ip is xx.xx.xx.242.

[alexten1983]

When I do that from inside I'm able to get to the outside ip but from out side I don't see it and I cant ping it.