I'm to stupid to setup VPN, can smb. please help me...
=> VPN Client Access:
Username: test_user
Password: test_pass
Active: checked
=> Client to Gateway:
Client To Gateway
Add a New Group VPN
TunnelGroup VPN
Group No. 1
Tunnel Name :
tunnel_group_1
Interface :
WAN1
Enable :
Local Group Setup
Local Security Group Type :
Subnet
IP Address :
172.16.0.0
Subnet Mask :
255.255.255.0
Remote Client Setup
Remote Client :
Email Address(USER FQDN)
Email Address :
test
@
example.com
IPSec Setup
Keying Mode : IKE with Preshared key
Phase 1 DH Group :
Group 5 - 1536 bit
Phase 1 Encryption :
AES-256
Phase 1 Authentication :
MD5
Phase 1 SA Life Time :
28800
seconds
Perfect Forward Secrecy :
Phase 2 DH Group :
Group 5 - 1536 bit
Phase 2 Encryption :
AES-256
Phase 2 Authentication :
MD5
Phase 2 SA Life Time :
3600
seconds
Preshared Key :
test
Minimum Preshared Key Complexity : Enable
Preshared Key Strength Meter :
Advanced
Aggressive Mode
Compress (Support IP Payload Compression Protocol(IPComp))
Keep-Alive
AH Hash Algorithm
MD5
NetBIOS Broadcast
NAT Traversal
/etc/vpnc/default.cfg
IPSec gateway 192.168.1.2
IPSec ID tunnel_group_1
IPSec secret test
#IKE Authmode hybrid
Xauth username test_user
Xauth password test_pass
IKE DH Group dh5
Perfect Forward Secrecy dh5
Domain test@example.com
Result:
# vpnc
vpnc: no response from target
Ping and Config Utility works on 192.168.1.2
Thanks!
