The RV100W includes a '\0' at the end of every line that caused the default Linux GUI text editor to use a wrong character set(non-Western). Choosing Western (ISO-8859-15) encoding solved the issue with the GUI text editor. Using the vi editor from the command line works and all the text is readable and in English. The problem was with the GUI text editor.
There was a problem opening the file “/.../..../Downloads/RV110W_syslog (4).txt”.
The file you opened has some invalid characters. If you continue editing this file you could corrupt this document.
You can also choose another character encoding and try again.
===============================Contents of the file=================================
〲〱〭ⴱ〠㨰〰㈺‴噒ㄱ地猠獹潬潮楴散猠獹潬ⵧ杮㍛㐵㩝猠獹潬ⵧ杮瘠牥楳湯ㄠ㘮ㄮ′瑳牡楴杮ഀ㈊ⴰ〭‱〰〺㨰㐲删ㅖ〱⁗敫湲渮瑯捩楌畮⁸敶獲潩⸲⸶㈲⠠決䁳整浡⤲⠠捧敶獲潩⸴⸲⤳⌠′桔⁵敄〲ㄠ㨰㔳〺‸卅⁔〲㠱ഀ㈊ⴰ〭‱〰〺㨰㐲删ㅖ〱⁗敫湲眮牡楮杮䌠啐爠癥獩潩獩›〰㜹㤴ഀ㈊ⴰ〭‱〰〺㨰㐲删ㅖ〱⁗敫湲眮牡楮杮䘠畯摮愠呓挠浯慰楴汢敳楲污映慬桳眠瑩㔲‶㐶䉋戠潬正㭳琠瑯污猠穩㘱䉍ഀ㈊ⴰ〭‱〰〺㨰㐲删ㅖ〱⁗敫湲眮牡楮杮䐠瑥牥業敮桰獹捩污删䵁洠灡:〲〱〭ⴱ〠㨰〰㈺‴噒ㄱ地欠牥慷湲湩敭潭祲›㐰〰〰〰䀠〠〰〰〰‰用慳汢⥥ഀ㈊ⴰ〭‱〰〺㨰㐲删ㅖ〱⁗敫湲椮普潚敮倠乆爠湡敧㩳ഀ㈊ⴰ〭‱〰〺㨰㐲删ㅖ〱⁗敫湲眮牡楮杮丠牯慭††††〠ⴠ‾†ㄠ㌶㐸ഀ㈊ⴰ〭‱〰〺㨰㐲删ㅖ〱⁗敫湲眮牡楮杮䠠杩䵨浥††ㄠ㌶㐸ⴠ‾†ㄠ㌶㐸ഀ㈊ⴰ〭‱〰〺㨰㐲删ㅖ〱⁗敫湲椮普慥汲役潮敤浟灡ㅛ⁝捡楴敶倠乆爠湡敧s〲〱〭ⴱ〠㨰〰㈺‵噒ㄱ地欠牥慷湲湩㨰††††‰㸭††㘱㠳4〲〱〭ⴱ〠㨰〰㈺‵噒ㄱ地欠牥慷湲湩畂汩⁴‱潺敮楬瑳†潔慴慰敧㩳ㄠ㌶㐸ഀ㈊ⴰ〭‱〰〺㨰㔲删ㅖ〱⁗敫湲渮瑯捩敋湲汥挠浯慭摮氠湩㩥爠潯㵴搯癥洯摴汢捯㉫挠湯潳敬琽祴こㄬ㔱〲‰湩瑩⼽扳湩瀯敲湩瑩ഀ㈊ⴰ〭‱〰〺㨰㔲删ㅖ〱⁗敫湲眮牡楮杮倠楲慭祲椠獮牴捵楴湯挠捡敨㌠欲ⱂ瀠票楳慣汬⁹慴杧摥ⴴ慷ⱹ氠湩獥穩㈳戠瑹獥.〲〱〭ⴱ〠㨰〰㈺‵噒ㄱ地欠牥慷湲湩牐浩牡⁹慤慴挠捡敨㌠欲ⱂ㐠眭祡楬敮楳敺㌠′祢整ഀ㈊ⴰ〭‱〰〺㨰㔲删ㅖ〱⁗敫湲椮普祓瑮敨楳敺䱔⁂敲楦汬栠湡汤牥⠠〲椠獮牴捵楴湯⥳.〲〱〭ⴱ〠㨰〰㈺‵噒ㄱ地欠牥湩潦匠湹桴獥穩摥吠䉌氠慯慨摮敬慦瑳慰桴⠠㈳椠獮牴捵楴湯⥳.〲〱〭ⴱ〠㨰〰㈺‵噒ㄱ地欠牥湩潦匠湹桴獥穩摥吠䉌猠潴敲栠湡汤牥映獡灴瑡㌨′湩瑳畲瑣潩獮⸩ഀ㈊ⴰ〭‱〰〺㨰㔲删ㅖ〱⁗敫湲椮普祓瑮敨楳敺䱔⁂潭楤祦栠湡汤牥映獡灴瑡㌨‱湩瑳畲瑣潩獮⸩ഀ㈊ⴰ〭‱〰〺㨰㔲删ㅖ〱⁗敫湲眮牡楮杮倠䑉栠獡慴汢湥牴敩㩳㔠㈱⠠牯敤㩲㤠〲㠴戠瑹獥)〲〱〭ⴱ〠㨰〰㈺‵噒ㄱ地欠牥慷湲湩偃㩕䈠䵃㌵㜵爠癥㈠愠⁴〳‰䡍z〲〱〭ⴱ〠㨰〰㈺‵噒ㄱ地欠牥慷湲湩獕湩㔱⸰〰‰䡍⁺楨桧瀠敲楣楳湯琠浩牥.〲〱〭ⴱ〠㨰〰㈺‵噒
