Hi,
i want to buy a cisco router with below mentioned specification, could anyone advice me that whih model meets these requirements:
- Hardware Architecture
- Should be based on modular architecture for scalability and should be a single box configuration for ease of management with the flexibility to use the appropriate choice of interfaces as and when required.
- The router offered should have high MTBF & low MTTR
- Power supply should be for 230V AC.
- May have redundant Power supply, not mandatory.
- Should have Min of 512 MB RAM & 256 MB FLASH and should be upgradeable.
- Interface
- Should have at least 3 Gig interfaces (at least 1 SFP Port)
- Should have at least 2 FE interface
- Dedicated Console port
- At least 1 USB port
petr
- Performance
- Should provide performance of at least 700kpps
- Routing table should be able to take more than 13k of routes.
- Should support performance enhancement through hardware based encryption.
- Router should support other IP Services like
- GRE
- IPSec VPN
- SSL VPN
- Tunnel-less/Client-Less VPN
- Firewall
- Should support MLPPP for link aggregation
- Protocol Support
- Should support Routing protocols like
- RIP ver1 &2
- OSPFv2 and v3
- BGP4
- Should support the following IP Multicast routing protocols
- IGMPv1 and v2
- PIM-SM
- PIM-DM.
- Should support following IPv6 features:
- DHCPv6,
- IPv6 QoS,
- IPv6 Multicast support,
- RIP
- OSPFv3 for IPv6.
- Should support MPLS Features
- Should support IP Accounting features
- Should support HSRP
- QoS Features
- Should support Classification and Marking:
- Policy based routing
- IP Precedence
- DSCP
- MPLS exp bits
- Congestion Management:
- Random Early Detection
- Priority queuing
- Class based weighted fair queuing
- Traffic Conditioning:
- Committed Access Rate/Rate limiting
- Link efficiency mechanisms:
- MLPPP
- Per VLAN QoS.
- Resource Reservation Protocol (RSVP)
- Support for Auto-QoS
- Security Features
- Should support the following
- multi-level of access
- SNMPv3 authentication, SSHv2
- AAA support using Radius and/or TACACS
- IP Access list and SNMP access to router
- Multiple privilege level authentications for console and telnet access
- Time based & Dynamic ACLs.
- MAC address authentication
- Management
- Should have support for CLI, Telnet and SNMPv3
- Should support Secure Shell
- Should provide a provision to analyze IP service levels for IP applications and services by using active traffic monitoring (the generation of traffic in a continuous, reliable, and predictable manner) for measuring network performance.
- Should support hardware assisted flow-based traffic analysis of applications, hosts, performance-based measurements on application and network latency, quality of experience metrics for network-based services such as voice over IP (VoIP) and video.
- Should have the ability to monitor events and take informational, corrective, action when the monitored events occur or when a threshold is reached.
- Implementation control configuration on the Router to ensure SNMP access to SNMP Manager or the NMS work station.
- Support for RMON1/RMON2.