Problem changing VLAN IP address

[Jazzyman11]

I have a working VLAN setup as shown below but when I try to change VLAN ID#3 IP address to 10.90.206.33 I get an error

"Configured IP Address already in use". Any ideas?????

[Tom Watts]

Hi Steve, considering you're using a /28 subnet mask I'd think the router would not be so literal... but apparently it is.

I'd recommend to set vlan 3 to some arbitrary subnet like 192.168.241.1 then change it to your desired 10.90.206.33

-Tom
Please mark answered for helpful posts

[Jazzyman11]

Hi Tom,

thanks for your suggestion. Vlan 3 changed to 192.168.241.1 ok but failed to chage to 10.90.206.33. Same error

"Configured IP Address already in use". So close yet so far!

Cheers

Steve

[Tom Watts]

Hi Steve, can you delete the vlan 3 and try?

I'm not sure why it wouldn't take it unless you have some configuration (service) somewhere occupying that subnet (such as a port forwarding, dns, etc)

-Tom
Please mark answered for helpful posts